Name: Replacement for Parker G01315 Hydraulic Filter Element
Brand: btlas
Availability: InStock

Replacement for Parker G01315 Hydraulic Filter Element

Replacement for Parker G01315 Hydraulic Filter Element

Brand: btlas

Category: Parker Hydraulic oil filter

Quantity:

Add your interested item to inquiry list and message us on WhatsApp for information on all products.

Hydraulic filter element

hydraulic oil filter element

Stainless steel filter element

Pressure Line Filter，

Parker G01315 Hydraulic Filter

Replacement for Parker G01315Q Hydraulic Filter Element

Replacement for Parker G01924 Filter Element

Description

Will this fit my housing without modification?

Yes. Dimensionally equivalent to the Parker G01315 — same OD, length, flow direction configuration. Drops straight in with no modification required.

What is the difference between absolute (beta rated) and nominal micron rating?

A nominal rating captures roughly 50–90% of particles at the stated size — and varies between manufacturers. An absolute rating means 99.5%+ capture efficiency, verified by ISO 16889 multi-pass testing of the media. This filter is 10 Micron; B9.9 = 200, B12.4 = 1000.

Is the filtration performance the same as OEM filters?

SONA's 10 Micron; B9.9 = 200, B12.4 = 1000 microglass media is tested to ISO 16889 with a Beta ratio of BX = 1000, equivalent in both efficiency and dirt-holding capacity.

How often should I change my filter element?

Change the Parker G01315 element when differential pressure reaches 25 PSID, or at your OEM service interval — typically every 500–2,000 operating hours depending on system load and contamination levels. Do not wait until the bypass valve activates.

Full Specs

O.D.	2.36"
I.D. Top	1.42"
I.D. Bottom	NA
Length Overall	9.6"
Construction Type	Microglass, Single Open End
Efficiency	10 Micron; B9.9 = 200, B12.4 = 1000
Gasket Material	Viton
Wire Support	Yes
Max Operating Pressure	305 PSID Collapse
Max Temp	248 Degress F
Weight Each	2.05
Carton Qty	1
Condition	New